Analog Telephony Cards

A400
Analog Cards

The Sangoma A400 analog telephony card is our high density analog card from two (2) to 24 ports for Asterisk, FreePBX and PBXact phone systems. That’s up to 24 PSTN calls all on a single PCI Express slot.  The modular nature of the cards allows you to mix and match between FXO and FXS interfaces, giving you the exact port configuration you need.

The base A400 telephony card provides from 2-12 analog ports using dual channel interface modules and is expandable up to 24 ports by adding daughterboards and the Remora backplane system

With hardware echo cancellation options, compatibility with most commercial grade servers and Linux operating systems and with a lifetime warranty, customers trust in Sangoma to deliver value based telephony solutions.

Sangoma

FXS Ports are used to connect analog telephones and fax machines. They are also used to connect to the FXO ports of an analog phone system. They provide ring voltage to FXO devices.

 

FXS modules for A400 cards
Each module supports up to 2 FXS channels, and up to two analog devices such as an analog phone or tradition fax machine.​

1 of 2

FXO ports are used to connect directly to PSTN telco / provider lines. They are used to connect your analog phone system to the PSTN. They receive ring voltage from FXS devices.

 

FXO modules for A400 cards
Each module supports up to 2 FXS channels, and up to two PSTN trunk lines.​

2 of 2
  • A400-A400BRMDE - A400 PCI Express card with hardware echo cancellation. FXS/FXO modules not included. Can be combined with up to 6 FXS or 6 FXO modules for a total of 12 ports.
  • A400-A400BRME - A400 PCI Express card without hardware echo cancellation. FXS/FXO modules not included. Can be combined with up to 6 FXS or 6 FXO modules for a total of 12 ports.
  •  
  • BRAC*A400RA - Full Height Bracket for A400RA Card.
  • BRAC*A400RALP - Low Profile Bracket for A400RA Card.
  •  
  • A200-FXO - 2 Port FXO module for use inside A400.
  • A200-FXS - 2 Port FXS module for use inside A400.
  • A400-A400RA - Sangoma Expansion Module for the A400BRME cards. This add on will give you access to 12 additional ports of FXO or FXS that can be added. The A400RA that you add onto your base A400BRM card you will need a A400BP2 remora which tethers the base card plus the daughter card.
  •  

Key Features and Benefits

Sangoma
Scalable

Scalable from 2-24 analog ports of mixed FXS and FXO all using one PCI Express slot.

Sangoma
Highly Compatible

Supported on Asterisk, FreePBX and PBXact phone systems and on most commercially available servers and motherboards.

Sangoma
Field Upgradable Firmware

Upgrade firmware remotely

Sangoma
Hardware Echo Cancellation (Optional)

Hardware echo cancellation provides crystal clear audio.

Sangoma
Warranty

Lifetime warranty.

Sangoma
Onboard Diagnostics

Onboard diagnostics and debugging toolkits expedites trouble resolution.

Applications

PSTN-Trunking

Use inside a server of your choice, powered by Linux/Windows, to create a SIP-TDM Gateway to allow IP-PBX to route calls to traditional PSTN.

PSTN-Trunking

SIP-Trunking

Use inside a server of your choice, powered by Linux/Windows, to create a SIP-TDM Gateway with your legacy analog based PBXs to replace expensive analog line connections with SIP trunking to allow reduced call costs, reduced line rental, and bring extra flexibility and disaster recovery.

SIP-Trunking

Fax and Legacy Gateway

Use our Sangoma cards in your choice of hardware to connect legacy analog equipment like fax machines, door-bells or analog phones to your IP-based network.

Fax and Legacy Gateway

Call Recording

Monitor and record telephone conversations for lawful call interception. Use your choice of software, including Sangoma’s own TDM SDK dedicated for call tapping.

Call Recording

Specifications

  • Interfaces
    • 2-24 ports of FXO/FXS (Scalable)
    • Up to 4 ports on base card
  • 2U form factor
  • 290mm x 55mm for use in 2U chassis
  • DB25 connector supporting up to 12 FXS/FXO interfaces (or 6 FXS/FXO modules). Scalable to 24 ports when adding 1 x daughterboard with backplane adaptor
  • All ports can be FXS or FXO using dual-channel modules
  • Cables included: Color-coded telephone cable that is ready for hardwiring into a punch block at the PSTN connection
  • DB25 connector supporting up to 12 FXS/FXO interfaces (or 6 FXS/FXO modules). Scalable to 24 ports when adding 1 x daughterboard with backplane adaptor
  • All ports can be FXS or FXO using dual-channel modules
  • Cables included: Color-coded telephone cable that is ready for hardwiring into a punch block at the PSTN connection
  • G.168-2002 echo cancellation in the hardware
  • 1024 taps/128 ms tail per channel on all channel densities
  • DTMF decoding and tone recognition
  • Voice quality enhancement: music protection, acoustic echo control and adaptive noise reduction
  • No CPU load as a result of echo cancellation
  • Does not increase the physical size of the card, and no additional slot is required
  • PCI Express: 800 mA peak, operational 300 mA max at +3.3 V or 5 V