SD-WAN failover T1 Cards

A101 Card

Sangoma’s A101 one (1) port T1 / E1 SD-WAN failover and data card supports data transfer rates up to 1.544 Mbps of full duplex data. The A101 is powered by a powerful driver and API suite providing support for WAN protocols such as CHDLC, Frame Relay, X.25, ATM, PPP, HDLC and MULTILINK

The A101 is also used to extend the life of data WAN networks for multi-location businesses. They are highly compatible in most commercial grade servers helping to keep existing hardware routing equipment on-site. With advanced drivers and API, create custom routing equipment to drop in place of existing obsolete setup.

Card Applications

Traditional Retail

Large Retailers collect inventory data from each store location and pass to headquarters to dispatch local distributors to re-stock shelves.

Failover Data WAN

Modern retailers use a combination of SD-WAN and Sangoma data cards within the same all-in-one infrastructure to pass store location data to headquarters to dispatch local distributors to re-stock shelves. 

Card Features

Troubleshooting

Includes on-board diagnostic tool kit.

Flexible Support

Supports most motherboards, servers and Linux OS.

Warranty
Life time Warranty
Learn More

For more features, view the Data Sheet.

Keep Your Existing Legacy Infrastructure

A-series cards are highly compatible in most equipment and are compatible under most Linux environments.

Replaces Obsolete Router Vendor Equipment

A-series telephony cards are actively supported for data WAN solutions where the competition has discontinued support making it difficult for you to get help if your system fails.

High Density

A-series cards are available in 1-16 ports of T1/E1 on a single PCI  or PCI-Express interface, offering up to 32,768 Mpbs of full duplex data.

Protocol Support

A-Series cards supportCAS, MFC/R2, PRI, SS7, HDLC, Frame Relay, X.25, Transparent bit-stream.

Card Specifications

Card Specifications

  • Interfaces Telephony
  • Interfaces: 1 x RJ45 connector for up 1.544Mbps of full duplex data

PCI Interfaces

  • PCI and PCI Express
  • Fully PCI 2.2 compliant, and X1 PCI express
  • Autosense compatibility with 5 V and 3.3 V PCI busses
  • Single synchronous PCI interface for all ports
  • 32 bit bus

Dimensions

  • 2U form factor
  • 120mm x 55mm for use in restricted chassis

Models

Appliance
  • A101-KIT - Sangoma A101 1 port T1/E1/J1 PCI AFT card supporting single T1/E1 or fractional T1/E1 data streams
  • A101-DKIT - Sangoma A101D 1 port T1/E1/J1 PCI 1024 tap (128ms) hardware based echo canceller across 30 channels AFT card supporting single T1/E1 or fractional T1/E1 data streams
  • A101-DEKIT - Sangoma A101DE 1 port T1/E1/J1 PCI Express 1024 tap (128ms) hardware based echo canceller across 30 channels AFT card supporting single T1/E1 or fractional T1/E1 data streams
  • A101-EKIT - Sangoma A101E 1 port T1/E1/J1 PCI Express AFT card supporting single T1/E1 or fractional T1/E1 data streams
Brackets
  • BRAC*A101 - Sangoma Full Height Bracket for A101 Cards
  • BRAC*A101LP - Sangoma Low Profile Bracket for A101 Cards

Where to Buy

Let us Help You
Find a Solution

Buy from a
Local Partner

Scroll to Top