A301 Clear Channel T3/E3 card

PDF PDF version available in:

English


The A301 card is a 2U PCI adapter that supports clear channel T3 (44.7 Mbps) and E3 (34.4 Mbps) over dual BNC connectors.

Based on bus mastering PCI technology supported by a ring-buffer DMA architecture, the A301 provides 132 Mbps of PCI bus transfer capacity with minimal real-time processor load.

The A301 is ideal for larger organizations or ISPs that have outgrown their multiple T1 or DSL links. The A301 allows these users to take advantage of the relatively low cost of T3/E3 connections when compared to multiple T1 or E1 lines.

Operating systems
  • Linux (all versions, releases and distributions from 1.0 up).
  • FreeBSD.
Line protocols

Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC.

Higher level protocols

IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25 (DMT and TCOP), SNA over X.25, PPPoE, PPPoA, IP over ATM.

Diagnostic tools

WANPIPEMON, SNMP, System logs

Certification

FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022 Class A, CIPSR 24, AFIC-S016, IEC 60950

Production quality

ISO 9002

Warranty
  • Five years parts and labor.
Contact information

Sangoma For more information, call toll free in North America 1 800 388 2475, direct at
1 905 474 1990
or email:

www.sangoma.com

PCI

A301 (PCI Interface)

Technical specifications
  • Dimensions: 2U Form factor: 120mm x 55 mm for use in restricted chassis.
  • 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
  • Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Allows new features to be added when they become available.
  • Power: 800mA peak, operational 300mA max at +3.3v or 5v.
  • Autosense compatibility with 5v and 3.3v PCI busses.
  • Temperature range: 0 - 50°C.
T3/E3 Standards
  • DS3/E3 Framer: ANSI T1.107_1988, ANSI T1.107_1989, T1.404, ITU-T G.751, ITU-T G.832, Bellcore TR-TSY-000009 and AT&T Pub 54014.
  • LIU Receiver: G.775, GR-449, ITU G.751, ITU G.752, ITU G.755, ETSI TBR 24 and GR-499-CORE, 1995.
  • LIU Transmitter: Bellcore GR-499, GR-253 and ANSI T1.102.
  • Jitter Attenuator: T1.105.03b, ETSI TBR-24, Bellcore GR-253 and GR-499.